Основным параметом при определении года выпуска инструмента являются первые буквы серийного номера. Так же нужно учитывать маркировки «Made in Japan» и «Crafted in Japan» которые как правило наносятся рядом с серийным номером или на тыльной стороне грифа.
Часто возникают ошибки при определении серийных номеров с маркировкой Made in Japan T и U по скольку они имеют повторения . В данном случае вернее всего будет посмотреть по состоянию инструмента и по возможности проверить соответствие с каталогами .
Made in Japan 1982-1997
Crafted in Japan 1997-2008
Made in Japan 2008-2013
JV + 5 digits
1982-84
A + 6 digits
1997-98
T0 + 5 digits
2007-10
SQ + 5 digits
1983-84
N + 6 digits
1995-96
U0 + 5 digits
2010-11
E + 6 digits
1984-87
O0 + 5 digits
1997-00
JD12 + 6 digits
2012
A + 6 digits
1985-86
P0 + 5 digits
1999-02
JD13 + 6 digits
2013
B + 6 digits
1985-86
Q0 + 5 digits
2002-04
JD14 + 6 digits
2014
C + 6 digits
1985-86
R0 + 5 digits
2004-05
F + 6 digits
1986-87
S0 + 5 digits
2006-08
G + 6 digits
1987-88
T0 + 5 digits
2007-08
H + 6 digits
1988-89
I + 6 digits
1989-90
J + 6 digits
1989-90
K + 6 digits
1990-91
L + 6 digits
1991-92
M + 6 digits
1992-93
N + 6 digits
1993-94
O + 6 digits
1993-94
P + 6 digits
1993-94
Q + 6 digits
1993-94
S + 6 digits
1994-95
T + 6 digits
1994-95
U + 6 digits
1995-96
N + 5 digits
1995-96
V + 6 digits
1996-97
Одно из популярных заблуждений, с которыми нам приходиться сталкиваться в сети, касается определения года выпуска инструментов Fender Japan Standard Series (J-Craft) .
Часто можно встретить объявления о продаже этих гитар с указанными в описании датами выпуска с 1993 по 1996 г. Это объясняется тем, что инструменты имеют серийные номера начинающиеся с букв O, P, Q и тд. Если проверить дату выпуска по этим серийным номерам то мы получим как раз 1993-94 год выпуска. Но не стоит спешить с выводами .
Есть несколько моментов которые следует учитывать при определении даты выпуска инструментов Standard Series . Эти инструменты появились в каталогах Fender Japan только в 1997-1998 г. До этого времени аналогичные инструменты выпускали под брендом Squier Silver Series .
Все модели серии Standard (страты, пресы, жабы и тд) маркировались как Made in Japan независимо от года выпуска . Надпись Made in Japan наносилась на голову грифа мелким шрифтом под названием модели , рядом с логотипом Fender . Серийные номера, как правило, находятся на тыльной стороне грифа в районе соединения с корпусом .
Источник
Проверить гитару aria по серийному номеру
DATING ESP GUITARS BY REFERENCE OF SERIAL NUMBERS
The serial numbers of ESP guitars were not or hardly administered in the early days of production. Serial numbers from before 2000 are therefore unreliable for an exact date.
Where to find the serial number The serial number is stamped on the back of the headstock, punched on the neck plate or on (semi) acoustic guitars on the bottom inside the body.
If you want to know the production year of your ESP guitar,you can decipher it with the serial number decoder, or find it in explanation about the dating system below.
ESP history in short
The founder of the ESP company is Hisatake Shibuya. He was born in 1937 in Sado on the island of the same name in Japan. After graduating from Doshina University in 1961, he joined the guitar manufacturer Kawai. After 4 years he joined Yamaha and later the guitar manufacturer Fernandes.
During this period he gained a lot of experience and started his own company in Tokyo in 1975. The company where he employed 3 employees consisted of a shop and a workshop for repairs and making parts for guitars. Guitars were also made here on a special order, which were built to the individual wishes of the customer.
The sale of the own-built guitars turned out to be a great success and the demand for them grew quickly. A few years later, the production facilities were therefore moved to larger premises just outside Tokyo. The company expanded and from 1979 orders for customized guitars were also produced worldwide.
In 1981 ESP established itself in the USA with an office in New York and in 1983 in Germany for distribution in Europe. Also in 1983, Hisatake Shibuya started a ‘guitar making vocational school’, some graduates of which landed a job at ESP.
ESP already had several hundred employees, but that number grew after a new plant was opened in 1986 in Sado Island.
In 1985 George Lynch of the heavy metal band Dokken discovered during a tour in Japan that ESP also built custom guitars. As a result, his famous ESP Kamikaze was created and ESP released this George Lynch’s Kamikaze as his first signature model.
In 1990, Metallica guitarist Kirk Hammett visited the ESP Custom Shop with the idea of building a model based on the mysterious Ouija board game. The first version was for Kirk only but had two spelling errors. Instead of «WILLIAM FULD TALKING BOARD», the Ouija body of this first version reads «WILLIAM FUED TALKING BAARD SET». The first batch of the Ouijas with Kirk signature were neck-thru and were released in 1993, destined for the Japanese market. Later the Ouija was introduced as a Bolt On guitar. The official introduction for export was in 1995.
ESP gained fame by making guitars for trash metal guitarists including James Hetfield (Metallica), Scott Ian (Anthrax) and Jeff Hanneman (Slayer). As a result, ESP has become one of the most popular suppliers of heavy metal guitars.
To keep costs down, the LTD series were now also made in Korea (later also in Indonesia, China and Vietnam) from 1996 and the export to the USA of the Japan-made LTD guitars stopped.
However, despite the now increased prices, ESP resumed the export of the Japanese series to the USA in the early 2000s.
Hisatake Shibuya
George Lynch with ESP kamikaze
Kirk Hammett with ESP Ouija The top-quality ESP guitars are made in the ESP managed and operated factory in Japan, and the more affordable LTD line is made in various locations in Asia.
The popularity and demand for ESP guitars continues to expand, with a new factory opened in North Hollywood, CA, USA in 2014 near the new Los Angeles headquarters. Here the line of ESP USA guitars is produced and was added to the existing well-known series of ESP as LTD and E-II series.
ESP is constantly innovating both electric and acoustic models.
The dating of guitars built in the eighties and nineties is often unreliable. Its administration was done carelessly. Some guitars from that period have no serial number at all.
Also with the neck plate serial numbers do not always give the exact date. (If they already have a number because neck plates with only the ESP logo were also used) The plates with number were made well in advance and used randomly.
For guitars without a serial number on the headstock or neck plate, you may still be able to find a serial number on the heel of the neck. There is also a chance that a number is written in the cavity on the body of the pickups. In that case you can decipher this number in the decoder to a date.
The eight-digit coding system from before 2000 looks like this: DDMMYNNN DD = day of the month (01 — 31) MM = month (01 — 12) Y = Last digit of the year NNN = production number 000 — 999 Example: 25055012 is the 12nd guitar built on May 25th 1995.
After 2000 a serial number system was used which is a lot simpler. It consists of 1 or 2 letters followed by 7 digits. The letter (s) indicate the location of manufacture. The first 2 digits are the year, the next 2 digits are the week number, the 5th digit is the day of the week and the last 2 digits is the production number. Example: SS1209210 SS = Custom Shop ESP 12 = 2012 09 = week number 9 2 = the 2nd day of week 9 10 = production number So SS1209210 is the 10nd guitar, built on February 28, 2012 in the Custom Shop of ESP in Tokyo. This system was used until 2015.
From 2016 another system was introduced. This system consists of 1 letter followed by 7 digits. The letter is the brand name, E = ESP. The first 4 digits are the production number, the next 2 digits the year and the last digit the series type. (1 = Custom series, 2 = Signatures series and 3 = E-II series). Example: E1234162 E = ESP 1234 = production number 16 = 2016 2 = Signatures Series
Kirk Hammett Signature (K-) serial numbers The first Kirk Hammett Signature guitars appeared as Custom Shop models back in 1993. Kirk Hammett’s signature is on the front of the headstock and the serial number on the back of the headstock.
These serial numbers start with K- followed by 4 or 5 digits. Until the official introduction in 1995 the guitars had a 4 digit number, then a 5 digit number was introduced.
Kirk Hammett Signature (K- serial number)
ASIA The guitars built in Korea, India, Indonesia, China and Vietnam use different serial number systems. This makes proper dating difficult. What they do have in common is that the first 2 digits after the letter prefix contain the year.
Productie locations Letter + 7 digits. E and U = Korea. I = Vietnam. L = China.
2 letters + 7 digits. IS and IR = Indonesia. Letter + 8 digits. W = World Musical Instrument Co., Incheon, Korea.
2 letters + 8 digits. IW, IX and IS = Indonesia. WR and GW = World Musical Instrument Co., Incheon, Korea. SX, SK, RS and SP = China.
2 letters + 9 digits. IS = Indonesia.
Factory World Musical Instrument Co., Incheon, Korea
Источник
Проверить гитару aria по серийному номеру
DATING PRS GUITARS BY REFERENCE OF SERIAL NUMBERS
Originally, the PRS serial numbers were stamped with ink on the headstock. All PRS guitars have a serial number that starts with a prefix that indicates the year. This prefix consists the one or two digits of the production year and applies to all models.
Where to find the serial number Depending on the model you find the serial number handpainted or printed on the headstock, or printed on the neck plate.
If you want to know the production year of your PRS guitar, you can decipher it with the serial number decoder, or find it in explanation about the dating system below.
PRS background information in short
PRS (Paul Reed Smith), founded in 1985, has had its headquarters and factory in Stevensville, Maryland since 1995. Now it is one of the world’s leading manufacturers of guitars and amplifiers. There is a co-operation with Cort industries in South Korea, which also has branches in Indonesia where the cheaper SE series is made.
PRS has distinguished itself for years by having an eye for detail with which the guitars are built. The types of wood are carefully selected and all parts are thoroughly tested and matched before a guitar leaves the factory.
Sources of inspiration for PRS include Gibson and Fender. The characteristic sound of these two brands, especially the Les Paul and the Stratocaster, PRS tries to unite to get a clear and warm sound.
In addition to the high quality, the guitars also stand out visually due to their shape, typical bird inlays and finish.